 | | PA-SSPT1 | To connect SlimSATA Optical Disc Drive with standard 40 pin IDE cable and FDD-type power connector. PA-SSPT1 has jumper for setting Master, Slave and CableSelect mode.
* Obsolete | |
 | | PA-SSPT2 | | To connect SlimSATA Optical Disc Drive with 2.5" IDE 2.0 mm pitch 44-pin cable connector. PA-SSPT2 has jumper for setting Master, Slave and CableSelect mode. | |
 | | CBL-SS76-40 | | SlimSATA ODD cable for slimline SATA optical drive, with HDD-type power input. | |
 | | PA-CDST | | Enable IDE slim ATAPI ODD connect to SATA port on motherboard or SATA host card. | |
 | | PA-CD1 | Provides slim ATAPI devices with standard 40 pin IDE, Power and CD Audio connectors.
* Obsolete | |
 | | PA-CD1-JP | Provides slim ATAPI devices with standard 40 pin IDE, Power and CD Audio connectors. PA-CD1-JP has jumper for setting Master, Slave and CableSelect mode.
* Obsolete | |
 | | PA-CD2 | Provides slim ATAPI devices with 2.0mm pitch 44 pin IDE / Power and CD Audio connectors.
* Obsolete | |
 | | PA-2DH25 | | Up to two 2.5 inch SATA HDDs can be mounted in a 3.5 inch drive bay. Use the same screws, SATA data and SATA power cables. | |
 | | PA-HD25B2 | | Up to two 2.5 inch IDE HDDs can be mounted in a 3.5 inch drive bay. Use same screws, IDE cable, power plug and mount it in the same way. | |
 | | PA-DS25B2 | Dual mobile 2.5" SATA HDD mounting card
Holds up to two 2.5 inch SATA HDDs. It can be mounted into all kinds of slot on motherboard. | |
 | | PA-HD25 | Apapter for 2.5" IDE hard drive to use standard 40-pin IDE cable.
* Obsolete | |
 | | PA-HD44C10 | 10 cm of flat cable for 2.5" IDE hard drive to connect to standard 40-pin IDE header on motherboard.
* Obsolete | |
 | | PA-CF5-V | | Enable CompactFlash (CF) storage card to use true IDE mode. The IDE and power cables are connected vertically. | |
 | | PA-CF5-H1 | | Enable CompactFlash (CF) storage card to use true IDE mode. The IDE and power cables are connected horizontally. | |
 | | PA-CF5-H2 | | Enable CompactFlash (CF) storage card to use true IDE mode. The IDE and power cables are connected horizontally. Two slots for two CF cards. | |
 | | PA-CF3-D1 | | Enable CompactFlash (CF) storage card to use true IDE mode. Plugs directly into IDE port on motherboard. Perfect for IPC 2U chassis. | |
 | | PA-CF3-D2 | | Enable CompactFlash (CF) storage card to use true IDE mode. Two slots for two CF cards. Plugs directly into IDE port on motherboard. Perfect for IPC 2U chassis. | |
 | | PA-CF3-VIA-D2 | Enable CompactFlash (CF) storage card to use true IDE mode. Two slots for two CF cards. Plugs directly into IDE port on motherboards (VIA MiniITX) with DOM power support. No power cable needed.
* Obsolete | |
 | | PA-CF18H | Enable CompactFlash (CF) storage card to use TRUE IDE mode. Directly replace HITACHI 1.8" PC IDE hard drive. Also compatible with 2.5" IDE port.
| |
 | | PA-CF25 | | Enable up to two CompactFlash (CF) storage cards to use TRUE IDE mode. Directly replace 2.5" IDE hard drive (for example: Laptop PC or Notebook PC). | |
 | | PA-CF18T | | For replaceing Toshiba 1.8" hard disk drive with Compact Flash memory card. Works like SSD. | |
 | | PA-CF18Z | | For replaceing 1.8" ZIF harddisk drive with CompactFlash memory card. Works like SSD. | |
 | | PA-HD18Z | 1.8 inch HITACHI / TOSHIBA ZIF HDD can be mounted in a 3.5 inch drive bay. Use same screws, IDE cable, power plug and mount it in the same way. Toshiba LIF may not be supported.
Note: According to the drive's Spec. the IDE cable should be no longer than 90mm.. | |
 | | PA-HD18H | | Hitachi 1.8 inch IDE HDD can be mounted in a 3.5 inch drive bay. Use same screws, IDE cable, power plug and mount it in the same way. | |
 | | PA-FD1-C30 | Connect slim floppy drive to FDD port on motherboard with connector for FDD Power.
* Obsolete | |
 | | PA-FD1-R | Convert standard floppy drive to slim type connector to use film flex cable like the LV-671 series SBC Mini-ITX motherboard from Commell.
* Obsolete | |
 | | PA-VT25 | This adapter enables you to use 2.5" IDE hard disk drive in Hitachi FLORA-ie 55mi Webpad.
* Obsolete | |
|
